User Tools

Site Tools


Sidebar


User's Manual & Quick Start Guide

Specifications

Where to Purchase

Donations & Support

Replacements Parts & Information

Mods & Improvements

How-to

OctoPrint

Slicer Stuff

Troubleshooting

Maintenance

WiFi

Web UI

Firmware

Downloads

Donations & Support



Looking for the Monoprice MP Mini Delta Wiki?

firmware:firmware_version_check

Checking Firmware Versions


Power Switch

The process of checking the firmware versions is a simple 1 or 2 step process.

  1. If the printer is on, turn it off.
  2. If the printer is off, power it on while observing the printers display.

The boot screen will display a logo and two numbers that are separated by a period or full stop.

These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. See the images below for more information.

Web Browser

While the printer is connected to WiFi you may use a web browsers address/URL bar to send a command that will display the firmware version numbers on the printers LCD. Using the on-board controls will clear the version numbers from the display. In rare cases you may have to turn the printer off and on to clear the display.

Format
http://printers_ip_address/set?cmd={V:}

Examples
http://192.168.1.108/set?cmd={V:}
http://10.10.10.5/set?cmd={V:}

The LCD will display a logo and two numbers that are separated by a period or full stop.

These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. See the images below for more information.


Examples Screenshots

In the pictures below the first number “40” is referring to the Motion Controller and the second number “113.2” refers to the UI/LCD Controller version.


In the picture below the first number “22” is referring to the Motion Controller and the second number “41” refers to the UI/LCD Controller version.

Firmware Version Check - Monoprice Select Mini / Malyan M200 3D Printer

firmware/firmware_version_check.txt · Last modified: 2017/12/06 19:37 by Matthew Upp