User Tools

Site Tools


firmware:firmware_version_check

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Last revision Both sides next revision
firmware:firmware_version_check [2016/11/25 20:29]
Matthew Upp created
firmware:firmware_version_check [2017/12/06 19:34]
Matthew Upp
Line 1: Line 1:
-===== Checking Firmware Versions =====+~~NOTOC~~
  
 +====== Checking Firmware Versions ======
  
-The process of checking the firmware versions is simple 1 or 2 step process. \\+---- 
 + 
 +<WRAP group> 
 +<WRAP half column>​ 
 + 
 +===== Power Switch ===== 
 +The process of checking the firmware versions is simple 1 or 2 step process. \\
  
   - If the printer is on, turn it off.   - If the printer is on, turn it off.
   - If the printer is off, power it on while observing the printers display. \\   - If the printer is off, power it on while observing the printers display. \\
-  -  
-The boot screen will display the Monoprice or Malyan logo and two numbers that are separated by a period or full stop.\\ 
  
-These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. \\ 
  
-In the picture ​below the first number "22" is referring to the Motion Controller and the second number "41" refers to the UI/LCD Controller version. \\+The boot screen will display a logo and two numbers that are separated by a period or full stop.\\ 
 + 
 +These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. See the images below for more information. \\ 
 + 
 +</​WRAP>​ 
 + 
 +---- 
 + 
 + 
 +<WRAP half column>​ 
 + 
 +===== Web Browser ===== 
 +While the printer is connected to WiFi you may use a web browsers address/URL bar to send a command that will display the firmware version numbers on the printers LCD. Using the on-board controls will clear the version numbers from the display. ​In rare cases you may have to turn the printer off and on to clear the display. 
 + 
 + 
 +**Format** \\ 
 +''​%%http://​printers_ip_address/​set?​cmd={V:​} %%''​ \\ 
 + 
 + 
 +**Examples** \\ 
 +''​%%http://​192.168.1.108/​set?​cmd={V:​}%%''​ \\ 
 +''​%%http://​10.10.10.5/​set?​cmd={V:​}%%''​ \\ 
 + 
 + 
 +The LCD will display a logo and two numbers that are separated by a period or full stop.\\ 
 + 
 +These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. See the images below for more information. \\ 
 + 
 +</​WRAP>​ 
 +</​WRAP>​ 
 + 
 +---- 
 + 
 +===== Examples Screenshots ===== 
 + 
 +In the pictures ​below the first number "<color #​CC2255>​40</​color>​" is referring to the Motion Controller and the second number "<color #​CC2255>​113.2</​color>​" refers to the UI/LCD Controller version. \\ 
 + 
 + 
 +<WRAP group> 
 +<WRAP half column>​ 
 +{{:​firmware:​firmware_version_m200_v2_and_m300.png?​450|}} 
 +</​WRAP>​ 
 + 
 + 
 +<WRAP half column>​ 
 +{{:​firmware:​firmware_version_explanation_m200_v2_and_m300.png?​450|}} 
 +</​WRAP>​ 
 +</​WRAP>​ 
 + 
 +----
  
 +In the picture below the first number "<​color #​CC2255>​22</​color>"​ is referring to the Motion Controller and the second number "<​color #​CC2255>​41</​color>"​ refers to the UI/LCD Controller version. \\
  
-{{ :​firmware_version_explanation.png |}} 
  
  
-YouTube link ​https://​youtu.be/PosEsTLZaFQ - Firmware Version Check - Monoprice Select Mini / Malyan M200 3D Printer ​ - A quick video showing the process.+<WRAP group> 
 +<WRAP half column>​ 
 +{{:firmware_version_explanation.png?500 |}} 
 +</WRAP>
  
 +<WRAP half column>
 +{{youtube>​PosEsTLZaFQ?​medium}}
 +Firmware Version Check - Monoprice Select Mini / Malyan M200 3D Printer
 +</​WRAP>​
 +</​WRAP>​
  
-{{youtube>​PosEsTLZaFQ?​large}} 
firmware/firmware_version_check.txt · Last modified: 2017/12/06 19:37 by Matthew Upp