User Tools

Site Tools


firmware:firmware_version_check

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
firmware:firmware_version_check [2017/12/06 19:10]
Matthew Upp
firmware:firmware_version_check [2017/12/06 19:37]
Matthew Upp
Line 1: Line 1:
-===== Checking Firmware Versions =====+~~NOTOC~~ 
 + 
 +====== Checking Firmware Versions ​======
  
 ---- ----
  
-==== Power Switch ====+<WRAP group> 
 +<WRAP half column>​ 
 + 
 +===== Power Switch ​=====
 The process of checking the firmware versions is a simple 1 or 2 step process. \\ The process of checking the firmware versions is a simple 1 or 2 step process. \\
  
Line 10: Line 15:
  
  
-The boot screen will display ​the Monoprice ​logo and two numbers that are separated by a period or full stop.\\+The boot screen will display ​logo and two numbers that are separated by a period or full stop.\\
  
-These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. \\+These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. See the images below for more information. \\
  
-----+</​WRAP>​
  
-==== Web Browser ​Address Bar ==== + 
-While the printer is connected to WiFi you may use a web browser ​to send a command that will display the firmware version numbers on the printers LCD. Using the on-board controls will clear the version numbers from the display. In rare cases you may have to turn the printer off and on to clear the display.+ 
 + 
 +<WRAP half column>​ 
 + 
 +===== Web Browser ​===== 
 +While the printer is connected to WiFi you may use a web browsers address/URL bar to send a command that will display the firmware version numbers on the printers LCD. Using the on-board controls will clear the version numbers from the display. In rare cases you may have to turn the printer off and on to clear the display.
  
  
Line 27: Line 37:
 ''​%%http://​192.168.1.108/​set?​cmd={V:​}%%''​ \\ ''​%%http://​192.168.1.108/​set?​cmd={V:​}%%''​ \\
 ''​%%http://​10.10.10.5/​set?​cmd={V:​}%%''​ \\ ''​%%http://​10.10.10.5/​set?​cmd={V:​}%%''​ \\
 +
 +
 +The LCD will display a logo and two numbers that are separated by a period or full stop.\\
 +
 +These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. See the images below for more information. \\
 +
 +</​WRAP>​
 +</​WRAP>​
  
 ---- ----
 +
 +===== Examples Screenshots =====
  
 In the pictures below the first number "<​color #​CC2255>​40</​color>"​ is referring to the Motion Controller and the second number "<​color #​CC2255>​113.2</​color>"​ refers to the UI/LCD Controller version. \\ In the pictures below the first number "<​color #​CC2255>​40</​color>"​ is referring to the Motion Controller and the second number "<​color #​CC2255>​113.2</​color>"​ refers to the UI/LCD Controller version. \\
firmware/firmware_version_check.txt · Last modified: 2017/12/06 19:37 by Matthew Upp