User Tools

Site Tools


firmware:firmware_version_check

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
firmware:firmware_version_check [2017/12/06 19:13]
Matthew Upp
firmware:firmware_version_check [2017/12/06 19:37]
Matthew Upp
Line 1: Line 1:
-===== Checking Firmware Versions =====+~~NOTOC~~ 
 + 
 +====== Checking Firmware Versions ​======
  
 ---- ----
  
-==== Power Switch ====+<WRAP group> 
 +<WRAP half column>​ 
 + 
 +===== Power Switch ​=====
 The process of checking the firmware versions is a simple 1 or 2 step process. \\ The process of checking the firmware versions is a simple 1 or 2 step process. \\
  
Line 10: Line 15:
  
  
-The boot screen will display ​the Monoprice ​logo and two numbers that are separated by a period or full stop.\\+The boot screen will display ​logo and two numbers that are separated by a period or full stop.\\
  
-These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. \\+These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. See the images below for more information. \\
  
-----+</​WRAP>​
  
-==== Web Browser ====+ 
 + 
 + 
 +<WRAP half column>​ 
 + 
 +===== Web Browser ​=====
 While the printer is connected to WiFi you may use a web browsers address/URL bar to send a command that will display the firmware version numbers on the printers LCD. Using the on-board controls will clear the version numbers from the display. In rare cases you may have to turn the printer off and on to clear the display. While the printer is connected to WiFi you may use a web browsers address/URL bar to send a command that will display the firmware version numbers on the printers LCD. Using the on-board controls will clear the version numbers from the display. In rare cases you may have to turn the printer off and on to clear the display.
  
Line 27: Line 37:
 ''​%%http://​192.168.1.108/​set?​cmd={V:​}%%''​ \\ ''​%%http://​192.168.1.108/​set?​cmd={V:​}%%''​ \\
 ''​%%http://​10.10.10.5/​set?​cmd={V:​}%%''​ \\ ''​%%http://​10.10.10.5/​set?​cmd={V:​}%%''​ \\
 +
 +
 +The LCD will display a logo and two numbers that are separated by a period or full stop.\\
 +
 +These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. See the images below for more information. \\
 +
 +</​WRAP>​
 +</​WRAP>​
  
 ---- ----
 +
 +===== Examples Screenshots =====
  
 In the pictures below the first number "<​color #​CC2255>​40</​color>"​ is referring to the Motion Controller and the second number "<​color #​CC2255>​113.2</​color>"​ refers to the UI/LCD Controller version. \\ In the pictures below the first number "<​color #​CC2255>​40</​color>"​ is referring to the Motion Controller and the second number "<​color #​CC2255>​113.2</​color>"​ refers to the UI/LCD Controller version. \\
firmware/firmware_version_check.txt · Last modified: 2017/12/06 19:37 by Matthew Upp