User Tools

Site Tools


firmware:firmware_version_check

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
firmware:firmware_version_check [2017/08/03 10:14]
Matthew Upp
firmware:firmware_version_check [2017/12/06 19:37] (current)
Matthew Upp
Line 1: Line 1:
-===== Checking Firmware Versions =====+~~NOTOC~~
  
 +====== Checking Firmware Versions ======
  
 +----
 +
 +<WRAP group>
 +<WRAP half column>
 +
 +===== Power Switch =====
 The process of checking the firmware versions is a simple 1 or 2 step process. \\ The process of checking the firmware versions is a simple 1 or 2 step process. \\
  
Line 8: Line 15:
  
  
-The boot screen will display ​the Monoprice ​logo and two numbers that are separated by a period or full stop.\\+The boot screen will display ​logo and two numbers that are separated by a period or full stop.\\
  
-These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. \\+These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. See the images below for more information. \\
  
-In the picture below the first number "​22"​ is referring to the Motion Controller and the second number "​41"​ refers to the UI/LCD Controller version. \\+</​WRAP>​ 
 + 
 + 
 + 
 + 
 +<WRAP half column>​ 
 + 
 +===== Web Browser ===== 
 +While the printer is connected to WiFi you may use a web browsers address/URL bar to send a command that will display the firmware version numbers on the printers LCD. Using the on-board controls will clear the version numbers from the display. In rare cases you may have to turn the printer off and on to clear the display. 
 + 
 + 
 +**Format** \\ 
 +''​%%http://​printers_ip_address/​set?​cmd={V:​} %%''​ \\ 
 + 
 + 
 +**Examples** \\ 
 +''​%%http://​192.168.1.108/​set?​cmd={V:​}%%''​ \\ 
 +''​%%http://​10.10.10.5/​set?​cmd={V:​}%%''​ \\ 
 + 
 + 
 +The LCD will display a logo and two numbers that are separated by a period or full stop.\\ 
 + 
 +These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. See the images below for more information. \\ 
 + 
 +</​WRAP>​ 
 +</​WRAP>​ 
 + 
 +---- 
 + 
 +===== Examples Screenshots ===== 
 + 
 +In the pictures below the first number "<​color #​CC2255>​40</​color>"​ is referring to the Motion Controller and the second number "<​color #​CC2255>​113.2</​color>"​ refers to the UI/LCD Controller version. \\ 
 + 
 + 
 +<WRAP group> 
 +<WRAP half column>​ 
 +{{:​firmware:​firmware_version_m200_v2_and_m300.png?​450|}} 
 +</​WRAP>​ 
 + 
 + 
 +<WRAP half column>​ 
 +{{:​firmware:​firmware_version_explanation_m200_v2_and_m300.png?​450|}} 
 +</​WRAP>​ 
 +</​WRAP>​ 
 + 
 +---- 
 + 
 +In the picture below the first number "<color #CC2255>22</​color>​" is referring to the Motion Controller and the second number "<color #CC2255>41</​color>​" refers to the UI/LCD Controller version. \\
  
  
Line 26: Line 80:
 </​WRAP>​ </​WRAP>​
 </​WRAP>​ </​WRAP>​
- 
  
firmware/firmware_version_check.1501755270.txt.gz · Last modified: 2017/08/03 10:14 by Matthew Upp