User Tools

Site Tools


firmware:firmware_version_check

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
firmware:firmware_version_check [2017/09/25 04:12]
Matthew Upp
firmware:firmware_version_check [2017/12/06 19:37] (current)
Matthew Upp
Line 1: Line 1:
-===== Checking Firmware Versions =====+~~NOTOC~~
  
 +====== Checking Firmware Versions ======
  
 +----
 +
 +<WRAP group>
 +<WRAP half column>
 +
 +===== Power Switch =====
 The process of checking the firmware versions is a simple 1 or 2 step process. \\ The process of checking the firmware versions is a simple 1 or 2 step process. \\
  
Line 8: Line 15:
  
  
-The boot screen will display ​the Monoprice ​logo and two numbers that are separated by a period or full stop.\\+The boot screen will display ​logo and two numbers that are separated by a period or full stop.\\
  
-These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. \\+These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. See the images below for more information. \\
  
-In the picture below the first number "<​color #​CC2255>​40</color>" is referring to the Motion Controller and the second number "<​color #​CC2255>​41</​color>"​ refers to the UI/LCD Controller version. \\+</WRAP>
  
  
  
-<WRAP group> 
-<WRAP half column> 
-{{:​firmware_version_explanation.png?​500 |}} 
-</​WRAP>​ 
  
 <WRAP half column> <WRAP half column>
-{{youtube>​PosEsTLZaFQ?medium}+ 
-Firmware Version Check - Monoprice Select Mini Malyan M200 3D Printer+===== Web Browser ===== 
 +While the printer is connected to WiFi you may use a web browsers address/URL bar to send a command that will display the firmware version numbers on the printers LCD. Using the on-board controls will clear the version numbers from the display. In rare cases you may have to turn the printer off and on to clear the display. 
 + 
 + 
 +**Format** \\ 
 +''​%%http://​printers_ip_address/​set?​cmd={V:} %%''​ \\ 
 + 
 + 
 +**Examples** \\ 
 +''​%%http://​192.168.1.108/​set?cmd={V:}%%''​ \\ 
 +''​%%http:​//​10.10.10.5/​set?​cmd={V:​}%%''​ \\ 
 + 
 + 
 +The LCD will display a logo and two numbers that are separated by a period or full stop.\\ 
 + 
 +These numbers represent the Motion Controller and UI Controller(LCD) firmware versions. See the images below for more information. \\ 
 </​WRAP>​ </​WRAP>​
 </​WRAP>​ </​WRAP>​
  
 +----
  
 +===== Examples Screenshots =====
  
 In the pictures below the first number "<​color #​CC2255>​40</​color>"​ is referring to the Motion Controller and the second number "<​color #​CC2255>​113.2</​color>"​ refers to the UI/LCD Controller version. \\ In the pictures below the first number "<​color #​CC2255>​40</​color>"​ is referring to the Motion Controller and the second number "<​color #​CC2255>​113.2</​color>"​ refers to the UI/LCD Controller version. \\
Line 40: Line 61:
 <WRAP half column> <WRAP half column>
 {{:​firmware:​firmware_version_explanation_m200_v2_and_m300.png?​450|}} {{:​firmware:​firmware_version_explanation_m200_v2_and_m300.png?​450|}}
 +</​WRAP>​
 +</​WRAP>​
 +
 +----
 +
 +In the picture below the first number "<​color #​CC2255>​22</​color>"​ is referring to the Motion Controller and the second number "<​color #​CC2255>​41</​color>"​ refers to the UI/LCD Controller version. \\
 +
 +
 +
 +<WRAP group>
 +<WRAP half column>
 +{{:​firmware_version_explanation.png?​500 |}}
 +</​WRAP>​
 +
 +<WRAP half column>
 +{{youtube>​PosEsTLZaFQ?​medium}}
 +Firmware Version Check - Monoprice Select Mini / Malyan M200 3D Printer
 </​WRAP>​ </​WRAP>​
 </​WRAP>​ </​WRAP>​
  
firmware/firmware_version_check.1506312724.txt.gz · Last modified: 2017/09/25 04:12 by Matthew Upp