User Tools

Site Tools


howto:default_settings

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
howto:default_settings [2018/06/10 14:44]
Matthew Upp
howto:default_settings [2018/09/26 02:12]
Matthew Upp
Line 64: Line 64:
 ; G-Code generated by Matthew Upp ; G-Code generated by Matthew Upp
 ; Load firmware default settings and save to EEPROM ; Load firmware default settings and save to EEPROM
 +; for Malyan M200 & MP Select Mini
 ; This file is much longer than it needs to be ; This file is much longer than it needs to be
-;+
 ; Lines with only a semicolon are for making line separations only ; Lines with only a semicolon are for making line separations only
 ; Please add a blank line to the end of the file while editing. DokuWiki Code Blocks deletes blank lines at the end of the block but g-code files should end with a single blank line at the end. ; Please add a blank line to the end of the file while editing. DokuWiki Code Blocks deletes blank lines at the end of the block but g-code files should end with a single blank line at the end.
Line 81: Line 82:
 ; ;
 M106 S0 ; turn fan off to signify completion M106 S0 ; turn fan off to signify completion
-M84 ; disable motors ​if engaged+M84 ; disable motors
 M0 S2 ; wait 2 seconds M0 S2 ; wait 2 seconds
 ; ;
 </​file>​ </​file>​
  
howto/default_settings.txt · Last modified: 2019/01/24 00:15 by Matthew Upp