User Tools

Site Tools


parts:nozzle

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
parts:nozzle [2017/05/06 06:12]
Matthew Upp
parts:nozzle [2018/07/29 11:41]
Matthew Upp
Line 3: Line 3:
  
 ---- ----
- 
-<wrap em>The MP Select Mini V1 & V2 use the same nozzle.</​wrap>​ 
  
 <WRAP group> <WRAP group>
Line 14: Line 12:
 [[parts:​nozzle#​replacements|Jump to replacements]] [[parts:​nozzle#​replacements|Jump to replacements]]
  
-The stock nozzle has an overall length of 10mm. \\+The V1 nozzle has an overall length of 10mm. \\
 Threads are M6x1.0 with a 5mm length. \\ Threads are M6x1.0 with a 5mm length. \\
 +Nozzle opening diameter is 0.4mm \\
 +
 +
 +The V2 nozzle has an overall length of 11.5mm. \\
 +Threads are M6x1.0 with a 6.5mm length. \\
 Nozzle opening diameter is 0.4mm \\ Nozzle opening diameter is 0.4mm \\
 <wrap lo>(For reference a genuine E3D nozzle has a thread length of 7.5mm)</​wrap>​ \\ <wrap lo>(For reference a genuine E3D nozzle has a thread length of 7.5mm)</​wrap>​ \\
Line 37: Line 40:
 ===== Replacements ===== ===== Replacements =====
  
-[[https://​wholesaler.alibaba.com/​product-detail/​Malyan-3d-printer-0-4mm-Nozzle_60627274517.html|Malyan 3d printer 0.4mm Nozzle of M200]] \\ +==== V1 ====
-<wrap em><​wrap lo>Exact match but cost prohibitive. $19.05 USD (Nozzle: $5.50 + Shipping: $13.55)</​wrap></​wrap>​ \\+
  
 +GiGDigit - [[https://​gigdigit.com/​nozzle-select-mini-v1|Nozzle - Select Mini V1]]
  
-[[https://​hobbyking.com/​en_us/​replacment-35-tips-for-them180.html|Malyan M180 - Replacement Tip 0.35]] \\ +==== V2 ====
-<wrap em><​wrap lo>Exact height and thread size but the nozzle opening is 0.35mm. It is a bit expensive for a single nozzle though.</​wrap></​wrap>​ \\+
  
 +GiGDigit - [[https://​gigdigit.com/​nozzle-0-4mm-select-mini-v2-mini-delta-qty-2/​|Nozzle - 0.4mm - Select Mini V2 / Mini Delta - (Qty 2)]]
  
-[[https://www.amazon.com/dp/B01EUWCX4Y/​|3maker J-head Extruder Hotend Copper Volcano Nozzle ​0.4mm for 3D Printer 1.75mm Filament]] \\ +Malyan'​s Alibaba.com Store - [[https://wholesaler.alibaba.com/product-detail/Malyan-3d-printer-0-4mm-Nozzle_60627274517.html|Malyan 3d printer ​0.4mm Nozzle of M200]]
-<wrap em><​wrap lo><​wrap hi>//​These nozzles do not have the same thread length as the stock nozzle. The threaded side is 1.17mm shorter than the original. You can get these nozzles to work by tightening the heat break/​filament guide all the way to the threaded half of the nozzle. If you miss this step filament may ooze out the sides. No idea as to why the product title has "​Volcano"​ in it. This nozzle is far too short to be an E3D Volcano nozzle.//</​wrap></​wrap></​wrap>​ \\+
  
  
 ---- ----
  
-**Any nozzle with M6 threads should work. You may have to make adjustments to the bed and/or heat break/​throat. You may also want to look into using a  [[thingiverse:​z-spacers|Z Spacer]].**+**Any nozzle with M6 threads should work. You probably will have to make adjustments to the bed and/or heat break/​throat. You may also want to look into using a [[thingiverse:​z-spacers|Z Spacer]].**
  
  
parts/nozzle.txt · Last modified: 2019/10/23 02:37 by Matthew Upp