User Tools

Site Tools


parts:nozzle

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
parts:nozzle [2019/10/23 02:27]
Matthew Upp
parts:nozzle [2019/10/23 02:37]
Matthew Upp
Line 12: Line 12:
 [[parts:​nozzle#​replacements|Jump to replacements]] [[parts:​nozzle#​replacements|Jump to replacements]]
  
 +==== V1 ====
 The V1 nozzle has an overall length of 10mm. \\ The V1 nozzle has an overall length of 10mm. \\
 Threads are M6x1.0 with a 5mm length. \\ Threads are M6x1.0 with a 5mm length. \\
 Nozzle opening diameter is 0.4mm \\ Nozzle opening diameter is 0.4mm \\
 +<wrap lo>(For reference a genuine E3D nozzle has a thread length of 7.5mm)</​wrap>​ \\
  
 +==== V2 & Pro =====
 The V2 nozzle has an overall length of 11.5mm. \\ The V2 nozzle has an overall length of 11.5mm. \\
 Threads are M6x1.0 with a 6.5mm length. \\ Threads are M6x1.0 with a 6.5mm length. \\
Line 23: Line 25:
  
  
-{{ :​parts:​m200_nozzle-dimensions.jpg?​250 |Overall length of 10mm.+/* {{ :​parts:​m200_nozzle-dimensions.jpg?​250 |Overall length of 10mm.
 Threads are M6x1.0 with a 5mm length. Threads are M6x1.0 with a 5mm length.
-Nozzle opening diameter is 0.4mm}}+Nozzle opening diameter is 0.4mm}} ​
  
  
-{{gallery>​parts:?​m200_nozzle_*.jpg&​150x150&​0&​lightbox }}+{{gallery>​parts:?​m200_nozzle_*.jpg&​150x150&​0&​lightbox }} */
  
----- 
  
 </​WRAP>​ </​WRAP>​
Line 44: Line 45:
 GiGDigit - [[https://​gigdigit.com/​nozzle-select-mini-v1|Nozzle - Select Mini V1]] GiGDigit - [[https://​gigdigit.com/​nozzle-select-mini-v1|Nozzle - Select Mini V1]]
  
-==== V2 ====+==== V2 & Pro ==== 
 + 
 +GiGDigit - [[https://​gigdigit.com/​nozzle-0-4mm-select-mini-v2-mini-delta-qty-2/​|Nozzle - 0.4mm - Select Mini V2, Pro/V3, Mini Delta, and MP10's - (Qty 2)]]
  
-GiGDigit - [[https://​gigdigit.com/​nozzle-0-4mm-select-mini-v2-mini-delta-qty-2/​|Nozzle - 0.4mm - Select Mini V2 / Mini Delta - (Qty 2)]] 
  
  
 ---- ----
  
-**Any nozzle with M6 threads should work. You probably ​will have to make adjustments to the bed and/or heat break/​throat. You may also want to look into using a [[thingiverse:​z-spacers|Z Spacer]].**+**Any nozzle with M6 threads should work but will probably have to make adjustments to the bed and/or heat break/​throat. You may also want to look into using a [[thingiverse:​z-spacers|Z Spacer]] ​if choosing this option.**
  
  
parts/nozzle.txt · Last modified: 2019/10/23 02:37 by Matthew Upp