(The long one)
| Outside Dia. | Inside Dia. | Length |
|---|---|---|
| 4 mm | 2 mm | ~290 mm |
GigDigit.com - Bowden Tube - MP Select Mini V1/V2
(The unnamed one)
(V1's only)
| Outside Dia. | Inside Dia. | Length |
|---|---|---|
| 6 mm | 4mm | ~7-9 mm |
Amazon.com - Iverntech 2M PTFE Teflon Tube OD 6mm x ID 4mm for RepRap 3D Printer
Amazon.com - Anycubic 1 Meters OD 6mm x ID 4mm PTFE Bowden Tube for 3D Printer
| V1 | ||
|---|---|---|
| Outside Dia. | Inside Dia. | Length |
| 3.5 mm | 2 mm | 26 mm |
| V2 | ||
|---|---|---|
| Outside Dia. | Inside Dia. | Length |
| 3.5 mm | 2 mm | ~51 mm |
| Some early batches may have been 4mm O.D. but it could be the sample I received was not a production model. The row below may not be accurate for any printers that were sold to customers. | ||
| 4 mm | 2 mm | ~26 mm or possibly ~51 mm |
GigDigit.com - PTFE Liner 3.5mm OD for heat break/throat - MP Select Mini V2 and Pro/V3 - (Qty 3)
These will work for the V1 also but each piece will need to be cut to length.
