User Tools

Site Tools


User's Manual & Quick Start Guide


Where to Purchase

Donations & Support

Replacements Parts & Information

Mods & Improvements



Slicer Stuff




Web UI



Donations & Support

Amazon Affiliate Program Disclosure

Looking for the Monoprice MP Mini Delta Site?


This is an old revision of the document!


Select Mini Not Connecting


  1. Extract the contents of the downloaded zip file.
  2. Click Tools from the menu bar.
  3. Click Firmware Configuration from the Tools drop-down.
  4. Click Import.
  5. Choose the MP Mini 3D Printers.frm file from the download location.
  6. Click Save.
    1. If a warning dialog box is displayed, read the warning message and click Okay.
  7. Locate the Processes section.
  8. Click Edit Process Settings to open the FFF Settings window.
  9. Choose your printers profile from the Select Profile: drop-down.
  10. Click the Show Advanced button.
  11. Switch to the G-Code tab.
  12. Locate the Update Firmware Configuration section.
  13. Choose MP Mini 3D Printers.frm from the Firmware type drop-down.
  14. Click Update Profile which is located next to the Select Profile: drop-down.
  15. Click OK.

Simplify3D Firmware Profile for MP Mini 3D Printers
This firmware profile will allow S3D to connect to the MP Select Mini V2 and MP Mini Delta.
(MP Select Mini V1 connects with or without this firmware.)


This will temporarily connect but then the printer becomes unresponsive.

  1. Click Tools from the menu bar.
  2. Firmware Configuration from the Tools drop-down.
  3. Switch to the Communication tab
  4. Locate the Communication Settings section.
  5. Uncheck Wait for startup command.
  6. Click Save and a warning dialog box will appear.
  7. Read the warning message and click Okay.
slicers/s3d.1505638401.txt.gz · Last modified: 2017/09/17 08:53 by Matthew Upp