User Tools

Site Tools


Sidebar


User's Manual & Quick Start Guide

Specifications

Where to Purchase

Donations & Support

Replacements Parts & Information

Mods & Improvements

How-to

OctoPrint

Slicer Stuff

Troubleshooting

Maintenance

WiFi

Web UI

Firmware

Downloads

Donations & Support



Looking for the Monoprice MP Mini Delta Wiki?

slicers:s3d

This is an old revision of the document!


Simplify3D


Select Mini Not Connecting

Windows

  1. Extract the contents of the downloaded zip file.
  2. Click Tools from the menu bar.
  3. Click Firmware Configuration from the Tools drop-down.
  4. Click Import.
  5. Choose the MP Mini 3D Printers.frm file from the download location.
  6. Click Save.
    1. If a warning dialog box is displayed, read the warning message and click Okay.
  7. Locate the Processes section.
  8. Click Edit Process Settings to open the FFF Settings window.
  9. Choose your printers profile from the Select Profile: drop-down.
  10. Click the Show Advanced button.
  11. Switch to the G-Code tab.
  12. Locate the Update Firmware Configuration section.
  13. Choose MP Mini 3D Printers.frm from the Firmware type drop-down.
  14. Click Update Profile which is located next to the Select Profile: drop-down.
  15. Click OK.

Simplify3D Firmware Profile for MP Mini 3D Printers
This firmware profile will allow S3D to connect to the MP Select Mini V2 and MP Mini Delta.
(MP Select Mini V1 connects with or without this firmware.)


macOS

This will temporarily connect but then the printer becomes unresponsive.

  1. Click Tools from the menu bar.
  2. Firmware Configuration from the Tools drop-down.
  3. Switch to the Communication tab
  4. Locate the Communication Settings section.
  5. Uncheck Wait for startup command.
  6. Click Save and a warning dialog box will appear.
  7. Read the warning message and click Okay.
slicers/s3d.1505638873.txt.gz · Last modified: 2017/09/17 09:01 by Matthew Upp