User Tools

Site Tools


wifi:android

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
wifi:android [2017/04/28 03:00]
Matthew Upp
wifi:android [2017/11/24 07:57] (current)
Matthew Upp
Line 8: Line 8:
  
 ===== MP 3D Printer WiFi Connect ===== ===== MP 3D Printer WiFi Connect =====
- 
- 
 ---- ----
  
Line 21: Line 19:
   - Open the MP 3D Printer WiFi Connect App.   - Open the MP 3D Printer WiFi Connect App.
   - Verify the correct SSID is displayed.   - Verify the correct SSID is displayed.
-  - Enter wireless network password. +  - Enter wireless network password ​or leave blank if no password is needed
-  - Use the printers dial and LCD to navigate to the “Move” menu.+  - Use the printers dial and display ​to navigate to the “Move” menu.
   - Press and hold the dial button.   - Press and hold the dial button.
   - Release the button when the “Smart config started” message is displayed.   - Release the button when the “Smart config started” message is displayed.
   - Tap the “Connect to WiFi” button and within 10-60 seconds the process should complete.   - Tap the “Connect to WiFi” button and within 10-60 seconds the process should complete.
-      - The printer'​s ​LCD will display "Smart config success"​ when the process is complete.+      - The printer'​s ​screen ​will display "Smart config success"​ when the process is complete.
       - The device will display "MP Select Mini is now connected to WiFi..."​       - The device will display "MP Select Mini is now connected to WiFi..."​
       - You will also notice the Select Mini has been assigned an IP Address that is displayed at the top of the printer'​s display.       - You will also notice the Select Mini has been assigned an IP Address that is displayed at the top of the printer'​s display.
  
-**Note:** If the "Smart config started"​ message does not stay after releasing the button you can hold the button down through the whole process and the message will disappear once the WiFi is connected. +<wrap lo> 
-\\+**Note:** If the "Smart config started"​ message does not stay after releasing the button you can hold the button down through the whole process and the message will disappear once the WiFi is connected. ​</​wrap>​
  
  
-**Trouble connecting?**+==== Notes ==== 
 +  ​This method will work with SSID & passwords that contain multiple spaces, space(s) at the end, special characters, & lower case characters in any location. 
 +  ​This method will work if WiFi password contains a semicolon ";"​ 
 +  * This method will work for configuring open system WiFi networks with no password 
 + 
 + 
 +==== Trouble connecting ​====
   * If the correct SSID is not displayed, go to the devices WiFi settings and switch to the appropriate wireless network.   * If the correct SSID is not displayed, go to the devices WiFi settings and switch to the appropriate wireless network.
   * WiFi and USB cannot access the printer simultaneously.   * WiFi and USB cannot access the printer simultaneously.
Line 41: Line 45:
   * If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer to your wireless network.   * If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer to your wireless network.
   * For the initial WiFi setup try moving the printer closer to the WiFi router.   * For the initial WiFi setup try moving the printer closer to the WiFi router.
 +
 +\\ 
  
  
Line 46: Line 52:
   - Perform the same steps to setup WiFi but use an incorrect password   - Perform the same steps to setup WiFi but use an incorrect password
   - The process is complete when:   - The process is complete when:
-    - The printer'​s ​LCD will display "Smart config success"​ when the process is complete.+    - The printer'​s ​screen ​will display "Smart config success"​ when the process is complete.
     - The device will either not show any message and time out or will show a "​Mission failed"​ message after a minute or so.     - The device will either not show any message and time out or will show a "​Mission failed"​ message after a minute or so.
     - You will also notice the Select Mini no longer has an IP Address displayed at the top of the printer'​s display. It should say no connection.     - You will also notice the Select Mini no longer has an IP Address displayed at the top of the printer'​s display. It should say no connection.
  
 +\\ 
  
  
wifi/android.1493348406.txt.gz · Last modified: 2017/04/28 03:00 by Matthew Upp