User Tools

Site Tools


wifi:g-code_file

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
wifi:g-code_file [2017/03/03 23:53]
Matthew Upp
wifi:g-code_file [2017/06/29 13:47]
Matthew Upp corrected some typos
Line 13: Line 13:
   - Copy the file onto a microSD card and insert the microSD card into the printer.   - Copy the file onto a microSD card and insert the microSD card into the printer.
   - From the Print menu select the file you just copied to the card.   - From the Print menu select the file you just copied to the card.
-  - The printer will go through a short routine. The fan turning on/off and movement of the X & Y axis is to let the user know that process has started and that is has ended. ​ i.e. The only important parts are the two lines that contain M550 & M551. +  - The printer will go through a short routine. The fan turning on/off and movement of the X & Y axis is to let the user know that process has started and that is has ended. ​ i.e. The important parts are the two lines that contain M550 & M551 
-    - The fan will turn on +    - The fan will turn on to signify start 
-    - X & Y axis with move to home position+    - X & Y axis will move to home position ​to signify start
     - SSID & Password will be saved to the printer     - SSID & Password will be saved to the printer
-    - The X-axis ​will move to the center of the bed+    - The hotend ​will move to the center of the bed
     - The fan will turn off to signify completion     - The fan will turn off to signify completion
-    - Sometimes ​ the LCD doesn'​t show the job as complete but you can cancel the job or power cycle the printer.+    - Sometimes the LCD doesn'​t show the job as complete but you can cancel the job or power cycle the printer.
  
 ** Limitations ** \\ ** Limitations ** \\
Line 40: Line 40:
 M106 S0 ; turn fan off in case it was already on M106 S0 ; turn fan off in case it was already on
 M106 S200 ; turn fan on to signify start M106 S200 ; turn fan on to signify start
-G28 X Y ; home X & Y+G28 X Y ; home X & Y to signify start
  
 ;  ​ ;  ​
Line 48: Line 48:
  
 G1 X60 Y60 F1000 ; CENTER bed to signify completion G1 X60 Y60 F1000 ; CENTER bed to signify completion
-M106 S0 ; turn fan to signify completion+M106 S0 ; turn fan off to signify completion
 M84 ; disable motors M84 ; disable motors
  
Line 55: Line 55:
  
 ==== NOTES: ==== ==== NOTES: ====
-  * WiFi and USB cannot access simultaneously.+  * WiFi and USB cannot access ​the printer ​simultaneously.
   * Disconnect USB cable from the printer if you want to use the WiFi function. ​   * Disconnect USB cable from the printer if you want to use the WiFi function. ​
   * WiFi works with 2.4 GHz b/g/n networks only.   * WiFi works with 2.4 GHz b/g/n networks only.
wifi/g-code_file.txt · Last modified: 2020/05/22 00:02 by Matthew Upp