User Tools

Site Tools


wifi:g-code_file

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
wifi:g-code_file [2020/05/21 23:09]
Matthew Upp
wifi:g-code_file [2020/05/22 00:02]
Matthew Upp
Line 15: Line 15:
   - The printer will go through a short routine. The fan turning on/off and movement of the X & Y axis is to let the user know that process has started and that is has ended. ​ i.e. The important parts are the two lines that contain M550 & M551   - The printer will go through a short routine. The fan turning on/off and movement of the X & Y axis is to let the user know that process has started and that is has ended. ​ i.e. The important parts are the two lines that contain M550 & M551
     - The fan will turn on to signify start     - The fan will turn on to signify start
-    ​- X & Y axis will move to home position to signify start +    - SSID & Password will be sent and saved to the printer 
-    ​- SSID & Password will be saved to the printer +    - The fan will turn off for one second and then pulse on and off a few times to signify completion 
-    - The hotend will move to the center of the bed +    - Sometimes the LCD doesn'​t show the job as complete but you can cancel the job or power cycle the printer. This seems to happen when there is not a blank/empty line at the end of the gcode file.
-    - The fan will turn off to signify completion +
-    - Sometimes the LCD doesn'​t show the job as complete but you can cancel the job or power cycle the printer.+
  
 ** Limitations ** \\ ** Limitations ** \\
wifi/g-code_file.txt · Last modified: 2020/05/22 00:02 by Matthew Upp