User Tools

Site Tools


wifi:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
wifi:start [2017/04/27 15:06]
Matthew Upp
wifi:start [2019/06/22 20:04] (current)
Matthew Upp
Line 1: Line 1:
 ~~NOTOC~~ ~~NOTOC~~
  
-====== ​Connecting to WiFi ====== +====== WiFi ====== 
-  * [[wifi:​android_3dcraft|Android ​3D Craft]] + 
-  * [[wifi:​android|Android - MP 3D Printer WiFi Connect]] +---
-  * [[wifi:​ios|iOS - MP 3D Printer WiFi Connect]]+ 
 + 
 +===== Connecting to WiFi ===== 
 +/*  * [[wifi:​android|Android - MP 3D Printer WiFi Connect]] 
 +  * [[wifi:​ios|iOS - MP 3D Printer WiFi Connect]] ​*/
   * [[wifi:​g-code_file|G-code file]]   * [[wifi:​g-code_file|G-code file]]
   * [[wifi:​g-code_usb|USB - G-code]]   * [[wifi:​g-code_usb|USB - G-code]]
   * [[wifi:​windows|Windows - Malyan Link]]   * [[wifi:​windows|Windows - Malyan Link]]
 +  * [[wifi:​android_3dcraft|Android - 3D Craft]]
  
  
Line 23: Line 28:
     - If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer.     - If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer.
     - For initial WiFi setup try moving the printer closer to the WiFi router.     - For initial WiFi setup try moving the printer closer to the WiFi router.
 +  * Some or possibly most slicer and Pronterface like programs will either convert the first character after each space to uppercase or convert all characters to uppercase. This means that it is possible that your SSID and/or password are not being sent correctly.
 +  * Connecting via USB (serial) will send all characters without converting them to uppercase. However, I have found that a SSID and/or password that is longer than 31 characters will not work. If you have a SSID and/or password that is longer than 31 characters, please try the mobile apps.
  
  
-**Link to firmware, Malyan Link (Windows PC), Malyan 3D Craft (Android):​** [[http://firmware.mpselectmini.com|http://​firmware.mpselectmini.com]]+**Link to firmware, Malyan Link (Windows PC), Malyan 3D Craft (Android):​** [[http://f.mpselectmini.com|http://​f.mpselectmini.com]] 
 + 
 +----  
 +===== Forget Network ===== 
 +While the MP Select Mini V1/V2 is connected to WiFi you may use the format **''​%%http://​PRINTERS_IP_ADDRESS%%''​** to send a single line of code g-code using a web browsers address/URL bar. See the examples in the following code block. 
 + 
 +**Format:** ''​%%http://​PRINTERS_IP_ADDRESS/​set?​cmd={W:​}%%''​ \\ 
 +<​code>​ 
 +http://​192.168.20.113/​set?​cmd={W:​} 
 +</​code>​ 
 + 
 +When the command is sent and received successfully the browser should display `OK` and the IP address should disappear from the LCD. 
 +\\ 
 + 
 +----
wifi/start.1493305577.txt.gz · Last modified: 2017/04/27 15:06 by Matthew Upp