wifi:start

This is an old revision of the document!

Connecting to WiFi

Accessing Web UI

Accessing Web UI

NOTES:

WiFi and USB cannot access simultaneously.
Disconnect USB cable from the printer if you want to use the WiFi function.
WiFi works with 2.4 GHz b/g/n networks only.
These next two notes apply to when connecting using the Android & iOS apps.
1. If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer.
2. For initial WiFi setup try moving the printer closer to the WiFi router.

Link to firmware, Malyan Link (Windows PC), Malyan 3D Craft (Android): http://fw.mpselectmini.com

wifi/start.1504888614.txt.gz · Last modified: 2017/09/08 16:36 by Matthew Upp