User Tools

Site Tools


wifi:usb_smart_config

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
wifi:usb_smart_config [2017/05/27 00:03]
Matthew Upp
wifi:usb_smart_config [2017/07/16 06:24]
Matthew Upp
Line 17: Line 17:
   - Enter wireless network password. (Do NOT tap "​Connect to WiFi" yet)   - Enter wireless network password. (Do NOT tap "​Connect to WiFi" yet)
   - Connect to the printer using your favorite Pronterface or Telnet program   - Connect to the printer using your favorite Pronterface or Telnet program
-  - Send command ''​%%556 P1%%''​. “Smart config started” message is displayed on the LCD (if working).+  - Send command ''​%%M556 P1%%''​. “Smart config started” message is displayed on the LCD (if working).
   - Tap the “Connect to WiFi” button and within 10-60 seconds the process should complete.   - Tap the “Connect to WiFi” button and within 10-60 seconds the process should complete.
       - The printer'​s LCD will display “Smart config success” when the process is complete.       - The printer'​s LCD will display “Smart config success” when the process is complete.
wifi/usb_smart_config.txt · Last modified: 2017/07/16 06:24 by Matthew Upp