This is an old revision of the document!
Link to firmware, Malyan Link (Windows PC), Malyan 3D Craft (Android): http://firmware.mpselectmini.com
NOTES: WiFi and USB cannot access simultaneously. Please disconnect USB from printer if you want to use WiFi function. WiFi seems to only work with 2.4 GHz networks. For initial WiFi setup try moving the printer closer to the WiFi router.
M550 SSID ;SSID = Name of WiFi network (case sensitive) M551 PASSWORD ;PASSWORD = Password for WiFi network (case sensitive)
This method will not work if WiFi password contains a semicolon “;”
This method will not work if WiFi network does not have a password / open system
; G-Code generated by Matthew Upp ; WiFi SSID & Password for Malyan M200 & MP Select Mini ; ; Look below and replace "SSID" with the name of your WiFi network - don't leave spaces after the SSID name ; Look below and replace "PASSWORD" with the password for your WiFi network - don't have spaces after the password ; This method will not work if WiFi password contains a semicolon ";" ; This method will not work if WiFi network does not have a password / open system ; Lines with only a semicolon are for making line separations only ; ; M106 S0 ; turn fan off in case it was already on M106 S200 ; turn fan on to signify start G28 X Y ; home X & Y ; ; ; M550 SSID M551 PASWSORD ; ; ; G1 X60 Y60 F1000 ; CENTER bed to signify completion M106 S0 ; turn fan to signify completion M84 ; disable motors
Check IP address displayed on LCD, copy this address to web browser in computer.